Prevent green pools and pool closures.
Amano tests commercial pool chemistry twice a day using reagents, and alerts you and your team when readings need attention, so problems get fixed before the water turns or an inspector shows up.
Amano monitors your pool on the days Shipley isn’t scheduled to be there.
Shipley keeps your pool on its regular service schedule. In between visits, Amano tests the water twice a day and alerts your team when a reading drifts, so small problems don’t wait for the next visit.
Know the health of your pools from anywhere.
Amano runs scheduled liquid-reagent tests twice a day and sends the results to you and your team. Open one dashboard to see when each commercial pool was last tested and which readings need attention.
Amano coaches your staff between Shipley visits.
Amano pairs chemistry readings with recommendations specific to each commercial pool. Between Shipley’s scheduled visits, your team can review suggested adjustments, compare past results, and see how the water responds after treatment.
Automatic alerts when readings need attention.
After every scheduled test, Amano checks each reading against its target range. If something drifts out, you and your team get an alert, so small problems get handled before the water turns green.
- Alerts after every scheduled test
- See which pool and which reading needs attention
- Every alert saved in the app for your records
Example alerts
Shareable pool logs that write themselves.
Amano automatically timestamps and stores every completed test. Share commercial pool logs with inspectors and staff through a QR code, with no login required.
ChlorineCombined
Chlorine
10/30 · 19:01pH 7.50Free chlorine 3.0 ppm
Example data · hover or tap the graph
Example data
Portfolio‑wide visibility.
One app.
Example data
Whether you manage two commercial pools or twenty, every one lives in a single dashboard. See chemistry readings, alerts, and chemistry logs across all your locations at a glance, without switching between accounts or properties.
- All commercial pools visible in one place, no extra accounts
- Readings, alerts, and logs for each commercial pool, side by side
- Add commercial pools anytime, multiple properties in one app
Fresh reagent tests 2x per day. No calibration needed.
No immersed chemistry probes to clean or calibrate. Fresh reagent cartridges arrive every month.
Cellular built in. Wi‑Fi when you need it.
Amano sends readings from the equipment room to your dashboard over built‑in cellular, so most properties need no network setup. For hard-to-reach equipment rooms, connect to Wi‑Fi instead.
Cellular service is subject to coverage at each installation.
A fresh cartridge in seconds.
Take the lid off, drop in a new reagent cartridge, and put the lid back on. That's the whole swap.
- 1Lid offThe reagent cartridge bay is right on top.
- 2Cartridge inPeel the seal and drop it in. About 10 seconds.
Easy and quick installation.
Connect Amano inline to a 2-inch commercial pool return pipe, after the filter and before any other chemical or heating equipment.
Will Amano work at your pool?
Check these four things.
Common questions.
No. Amano runs scheduled tests, typically twice a day, and you can adjust the test times. It isn't continuous, real-time, or 24/7 measurement.
Amano uses liquid reagents, not an immersed probe, to test pH, free chlorine, combined chlorine, total chlorine, and total alkalinity, and it reports water temperature. It's built for commercial pools, not residential floaters.
No. Amano tests and recommends. Your team still makes the adjustments, so it doesn't replace product labels, site procedures, or operator judgment.
That depends on your local health department regulations. Keep any manual testing and recordkeeping your local code requires.
It mounts inline on a 2-inch return pipe, or a bypass, after the filter and before any other chemical or heating equipment. It needs a standard 120V outlet and at least 40 GPM and 10 PSI at the install point.
Your maintenance team, pool service company, or installer. The inline tee fitting is included, and we provide installation guidance plus a training demo with your team.
No. Amano uses built-in cellular and switches between AT&T and Verizon networks for the strongest signal. For hard-to-reach equipment rooms, connect it to Wi‑Fi instead.
Yes. Amano tests twice a day by default, and you can adjust the test times in the app.
After each scheduled test, Amano alerts your team if a reading is out of range. Every test is timestamped and stored, and you can share pool logs with inspectors or staff by QR code, with no login on their end.
A fresh cartridge arrives every month. Each one runs 60 tests, and swapping it takes about 10 seconds.
Yes. Every pool and property lives in one app, with readings, alerts, and logs side by side. Add pools anytime.
Manual testing replacement depends on local health department regulations.
*During regular business hours.
AT&T and Verizon are trademarks of their respective owners. Amano is not affiliated with or endorsed by them.